ELECTRONICS:
- 1 GPS Sodena WP 14, color NL
- 1 Furuno GP-70 GPS
- 1 GPS integrated in the radar, GPS Navionic
- Barometer Meteoman and clock
- VHF Shipmate RS 8300 with dual timer
- Satellite phone Sat-Com KVH Tracphone
- Complete set of electronic charts for plotter
- Magnetic compass COMPASS
- Raymarine electronic log with digital screen
- Raymarine electronic depth sounder
- Directional sounder Eco Pilot
- Raymarine electronic anemometers with wind speed and angle, includes analog screen
- Conventional Windex
- NAVTEX McMurdo ICS NAV6
- WEATHERFAX Furuno papermodel
- Furuno radar (Navnet), 5 KW, Range 48 Nm – GPS plotter Navionic included
- Furuno chartplotter at helm station
- Furuno chartplotter CP31 at navigation desk
- Chart system in CD-ROM managed by software on the computer
- Autopilot Robertson AP 300X
- 1 B & G marine conditions system
DECK EQUIPMENT:
- 1 Electric double anchor windlass with chain washing system
- Stainless steel chain locks
- Remote-controlled operation and push-button system
- 1 Galvanized C.Q.R. anchor 165 lb., stowed on the bow roller to starboard
- 1 Galvanized C.Q.R. anchor 165 lb. to port
- 100 meters of 14.65mm stainless steel anchor chain
- Horizontal capstan
- Windlass with barboten, brake, clutch, and horizontal winch
BOW THRUSTER:
- Max Power hydraulic, joystick control from helm station
STEERING SYSTEM:
- Hydraulic system with servo hydraulic pump controlled from the helm. Rebuilt in 2008
GENERATORS:
- 1 x 16 Kw (at 1500 rpm)
- 1 x 6.5 Kw Onan, installed in soundproof boxes
- Remote start/stop control from the salon
AIR CONDITIONING:
- Clima CWS 25, capacity 55,000 BTU
HEATING SYSTEM:
- Two compressors with reverse cycle system:
- Heat/cold with digital and individual thermostats in cabins, salon, and engine room
- Webasto HL95, controlled by thermostat
RECENT UPGRADES ONBOARD:
- Engine room:
- Inspection and servicing of both compressors
- Replacement of the entire refrigeration system for the fridges
- Maintenance of watermaker filters
- Complete engine service: includes injector replacement, compression test, and renewal of the engine’s cooling system
- Bathrooms: complete update, including replacement of plumbing systems, faucets, and drains
- Electrical system: replacement of all interior lighting system. New wiring, switches, and LED low consumption lights
- Installation of new low-maintenance batteries
- Galley: new appliances, including extractor fan, and new countertop
- New carpet, upholstery, and ceilings
- Cockpit: overhaul and update of teak base
- Deck: teak deck polishing and replacement of all sika joints
- Hull: new antifouling and replacement of anodes
- Rigging: inspection of rigging and replacement of some halyards and sheets
- Winches: disassembled, greased, and serviced
- Varnishes and metals polished and restored
- Replacement of the bow thruster motor for increased power and flow
- New semi-rigid tender with aluminum base